FSANLC23-K01C_40G QSFP+_SFP Optical Transceivers_Products

FSANLC23-K01C

QSFP+ 40Gb/s LX4 1km DDM

Product Features:
l Supports 41.2 Gb/s aggregate bitrates;
l Uncooled 4x10Gb/s CWDM transmitter;
l Hot-pluggable QSFP+ footprint;
l Single 3.3V power supply;
l Power dissipation < 3.5W;
l Operates over duplex multi mode and single mode fiber with dual LC receptacles;
l Maximum link length of 140m on OM3, 160m on OM4, and 1km on SMF;
l Support Digital Diagnostic Monitor interface;
l Compliant to the SFF-8636 Common Management Interface MSA;
l Case operating temperature Commercial: 0°C to +70°C

Back to list

Product Overview Product Features Specifications

Overview

I. Pin Descriptions

QSFP MSA-compliant 38-pinconnector

Pin	Symbol	Name/Description	Notes
1	GND	Ground	1
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground	1
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground	1
8	ModSelL	Module Select
9	ResetL	Module Reset
10	VccRx	+3.3 V Power supply receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground	1
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground	1
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground	1
20	GND	Ground	1
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground	1
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground	1
27	ModPrsL	ModulePresent
28	IntL	Interrupt
29	VccTx	+3.3 V Power supply transmitter
30	Vcc1	+3.3 V Power Supply
31	LPMode	Low Power Mode
32	GND	Ground	1
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground	1
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground	1

Notes：

1. Circuit ground is internally isolated from chassis ground.

II. Absolute Maximum Ratings

Parameter	Symbol	Min	Type	Max	Unit	Ref.
Supply Voltage	Vcc	-0.5		3.6	V
Storage Temperature	TS	-5		75	℃
Case Operating Temperature	TOP	0		70	℃
Relative Humidity	RH	5		85	%	1
Damage Threshold	DT	3			dBm

Notes:

1.Non-condensing.

III. Recommended Operating Conditions

Parameter	Symbol	Min	Type	Max	Unit
Case Operating Temperature	Top	0		70	℃
Supply Voltage	VCC	3.15	3.3	3.45	V
Differential data input voltage per lane	Vdin	200		1200	mV
Signaling rate per lane	Dr	2.5	10.3125		Gbit/s
Differential Termination Resistance	Zin	80	100	120	Ω
Module power	P			1.5	W

IV. Optical Characteristics

Parameter	Symbol	Min	Type	Max	Unit
Transmitter
Center wavelength	λc	840	850	860	nm
RMS Spectral Width	Pm			0.6	nm
Average Launch Power per Lane	PAVG	-6.0		+2.4	dBm
Optical Extinction Ratio	ER	3			dB
Average Launch power Tx_off	Poff			-30	dBm
Receiver
Center wavelength	λc	840	850	860	nm
Sensitivity@BER=E- 12	Psen			-10.2	dBm
Optical Return Loss Tolerance	RL			12	dB
LOS De-Assert	LOSD			-15	dBm
LOS Assert	LOSA	-30			dBm
LOS Hysteresis	LOSH	0.5			dB

V. Memory Map and Control Registers

Compatible with SFF-8436

VI. Recommended Interface Circuit

VII. Mechanical Specifiactions

Cable Length Tolerant

Cable Length（Unit: m）	Tolerant（Unit: cm）
＜1.0	+5/-0
1.0~4.5	+15/-0
5.0~14.5	+30/-0
≥15.0	+2%/-0
LC cable	+5/-0

feature

Product Features

l Supports 41.2 Gb/s aggregate bitrates

l Uncooled 4x10Gb/s CWDM transmitter

l Hot-pluggable QSFP+ footprint

l Single 3.3V power supply

l Power dissipation < 3.5W

l Operates over duplex multi mode and single mode fiber with dual LC receptacles

l Maximum link length of 140m on OM3, 160m on OM4, and 1km on SMF

l Support Digital Diagnostic Monitor interface

l Compliant to the SFF-8636 Common Management Interface MSA

l Case operating temperature Commercial: 0°C to +70°C

Applications	Compliance
4x10G Ethernet	QSFP+ SFF-8436
	QSFP+ MSA
	RoHS

Specifications

Ordering Information

Package	Product part NO.	Distance	Temperature Range
QSFP+ to 4LC	FSANAA38-M01C	1-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M03C	3-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M05C	5-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M06C	6-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M10C	10-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M15C	15-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M20C	20-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M25C	25-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M30C	30-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-M50C	50-metercable	Commercial: 0~70℃
QSFP+ to 4LC	FSANAA38-S10C	100-metercable	Commercial: 0~70℃
For availability of additional cable lengths, please contact Fibridge*.